REMS 580010 Curvo Bending Machine 220 volt Anglia Pipe Tools
Posted on by
Rems Curvo. REMS 580024 Curvo Electric Pipe Bender Set (3/8"7/8") REMS Tools REMS Curvo - wrinkle-free bending! Universal for many pipes and tubes, compact, with integral absorbtion of torque during bending, super light, drive unit only 17.6 lbs REMS Akku-Curvo 22 V - Cordless bending, wrinkle free up to 180° Universal for many pipes and tubes; Compact, with integral absorbtion of torque during bending; Super light, drive unit only 8,5 kg (18.7 lbs) Can be used anywhere with-out previous setting; Fast and creep speed operation for precise bending, e.g
Electric tube bender set "REMS Curvo" 10 to 40 mm, 3 / 8 to 3 / 4 from www.esska-tech.co.uk
Only one type of bending and back formers for REMS Curvo, REMS Curvo 50 and REMS Akku-Curvo; Maintenance-free gear with safety slipping clutch; Universal motor 110 V, 50-60 Hz, 1000 W (1.36 HP) Recover full cost of this tool after a small number of bends through savings on fittings; Use with pipes diameter 10 - 40 mm (3/8 - 1-3/8 inch), up to. Hard, semi-hard, soft copper pipes, also thin-walled, Ø 10 - 35 mm, Ø ⅜ - 1⅜", soft coated copper pipes, also thin-walled, Ø 10 - 18 mm, thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø ⅜.
Electric tube bender set "REMS Curvo" 10 to 40 mm, 3 / 8 to 3 / 4
REMS Curvo - wrinkle-free bending! Universal for many pipes and tubes, compact, with integral absorbtion of torque during bending, super light, drive unit only 17.6 lbs Hard, semi-hard, soft copper pipes, also thin-walled, Ø 10 - 35 mm, Ø ⅜ - 1⅜", soft coated copper pipes, also thin-walled, Ø 10 - 18 mm, thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø ⅜. Hard, half-hard, soft copper tubes, also thin wall Ø 10-42 mm
REMS Curvo Electric pipe and tube bender. REMS Akku-Curvo 22 V - Cordless bending, wrinkle free up to 180° Universal for many pipes and tubes; Compact, with integral absorbtion of torque during bending; Super light, drive unit only 8,5 kg (18.7 lbs) Can be used anywhere with-out previous setting; Fast and creep speed operation for precise bending, e.g Hard, semi-hard, soft copper pipes, also thin-walled, Ø 10 - 35 mm, Ø ⅜ - 1⅜", soft coated copper pipes, also thin-walled, Ø 10 - 18 mm, thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø ⅜.
REMS Curvo 50 Electric pipe and tube bender. multi-layer composite tubes Ø 14-50 mm (additional materials see REMS Curvo) REMS Curvo 50 - wrinkle free bending of large pipes REMS Curvo Electric pipe and tube bender Universal, compact electric tool for cold bending of pipes and tubes up to 180°